New

• Basic situation of the auto parts industry 2024-10-13

  The automobile industry is the driving industry of my country's national economy. It has the characteristics of large market potential, high correlation, large consumption drive, obvious scale benefits, and intensive capital and technology. The auto parts industry is the foundation for the development of the auto industry and the basis for supporting the sustainable development of the auto industry. An important condition for the development of workpieces, it is an important link in the automotive industry chain. Auto parts include various spare parts for motor vehicles and their bodies. Cars are usually composed of tens of thousands of parts.  According to system type, automobile parts can be divided into engine systems, transmission systems, braking systems, suspension systems, steering systems, electrical systems, etc.

• Future development trends of the auto parts industry 2024-10-11

  Global resource allocation and parts procurement            As the global resource allocation model of the automobile industry matures and competition in the automobile industry intensifies, international automobile manufacturers, in order to reduce costs and enhance international competitiveness, gradually focus on the research and development and launch of new models on the market, reducing the number of The self-made rate of auto parts has shifted to allocating resources globally, building factories in emerging auto markets such as China, India, and Mexico, and purchasing auto parts products with competitive advantages in local markets. Global procurement has become the key to the automotive industry. important development trends. Under such a trend, local parts manufacturers have gradually entered the parts supporting system of international vehicle manufacturers by virtue of their cost advantages and service responsiveness. Major international parts giants have also gradually extended their production and R&D bases to major global automobile manufacturers. Every corner of the market. With the technological progress and experience accumulation of auto parts companies

• Car Aroma diffuser market status analysis and development trend research report 2024-03-14

  Car aroma diffuser improves the air quality in the car and provides a pleasant driving experience by releasing aromas into the air inside the car through heating or diffusion technology.home fragrance diffuser Vehicle-mounted smart aromatherapy has evolved from traditional vehicle-mounted aromatherapy to interactive functions such as voice interaction, gesture interaction, hidden smart air outlets, and intelligent fragrance recognition, creating a smart and convenient cockpit atmosphere for people.diffusers for essential oils The car aromatherapy product market is a growing market. With the improvement of people's living standards and the increasing popularity of cars, people have higher and higher requirements for the comfort and quality of the car's internal environment. Therefore, the market size of car aromatherapy products is also expanding. The pre-installation market is that which is installed on the car before it leaves the factory. According to the current configuration rate of aromatherapy devices in cars, a total of 4.5656 million cars worldwide will need to be equipped with aromatherapy products in 2022.aromatech diffuser

• Industrial plastic raw material applications 2024-03-06

  The plastics industry has high technical characteristics﹑high industry﹑advanced nature﹑etc.and has penetrated into many fields such as automobiles﹑consumer electronics﹑and household appliances. In 2021, China's plastic product output will be 20.4455 million tons. In particular, emerging plastics have improved the ignition resistance of products. properties﹑strength﹑impact resistance. Globally, plastic consumption has surpassed steel and has become an important industrial material. In China, plastic consumption is about 90 million tons, making China the world's largest consumer of plastics, with an industry scale of 2.6 trillion. An analysis of the current situation of the plastics industry found that there are 13,400 companies related to plastic processing in my country's plastics industry, but overall they are still traditional production enterprises, which greatly limits the further development of the industry. As one of the pillar industries of China's light industry, the plastics industry has maintained a growth rate of more than 10% in recent years. In the plastic products industry, the total output value of enterprises above designated size ranks third among the 19 major light industry industries, with a product sales rate of 97.8%, which is higher than the average level of the light industry industry. China's plastic packaging industry is huge and has maintained sustained and steady growth in recent years. In 2021, China's plastic packaging industry achieved product sales revenue of 286.832 billion yuan, a year-on-year increase of 8.02%, and the compound growth rate in the past five years reached 7.94%. In ter

• Automobile plastic parts spray paint 2023-08-19

  For the coating of automotive plastic parts, the interior part focuses on solvent resistance, and the exterior part focuses on water resistance, abrasion resistance, weather resistance and decoration, etc. Plastic parts can be sprayed manually and automatically.Automobile Parts.Primer spraying,Automobile Spare Parts The wind speed in the manual spraying area of the plastic paint spray booth is generally set at 0.4~0.5m/s, and the process temperature is generally controlled at 18~350°C. In winter, the temperature of the spray booth of this line is generally not lower than 180°C.After the air-conditioning system is transformed into a humidification system, the temperature in summer can basically be controlled below 350°C, and the relative humidity is generally controlled at 60-70%. After the primer plastic paint is sprayed, the wet plastic paint film contains a lot of organic solvents.If it is directly baked in a baking room, the rapid evaporation of the solvent will cause pinholes and bubble defects on the surface of the paint film. During the drying process, as the solvent evaporates, the plastic coating can be fully leveled and spread.dry primer,Car Components. There are two types of plastic paint currently in use, namely quick-drying type and ordinary type.The quick-drying type can be dried naturally, but the ordinary type cannot be cured naturally and quickly after construct

• Beauty-based consumption: cosmetics, skin care, lip gloss and other beauty industries are booming 2023-07-24

  Beauty consumption: cosmetics, skin care, lip gloss and other beauty industries are booming This generation is keen to pursue Everything related to good looks and beauty consumption is prevalent in this generation, related products such as Beauty makeup, skin care, lip gloss are sought after, Empty Lip Gloss Containers,For this generation, Lipstick Tube,the consumer demand for beauty is far from enough be met. Mascara Tube,Taking the cosmetics industry as an example, although the Chinese cosmetics market has developed rapidly in recent years, Compared with European and American countries, my country's per capita consumption of cosmetics is still relatively low. 2019, China Per capita consumption of cosmetics is only US$50, only higher than that of Hong Kong, Japan and Norway. Compared with 11%, 16%, 17%, and 18% in the United States, Custom Lip Gloss Tubes,and the development potential of third- and fourth-tier cities and below is huge. China has a large population of 1.4 billion, and there is a lot of room for growth in the demand for cosmetics in the future, such as: lipstick tubes, lip gloss tubes, eyelash tubes, perfume bottles, etc.

• Spray bottle production needs to master the nozzle core technology 2023-03-01

  Nowadays, spray bottle packaging is used more and more in many fields,Clear Plastic Spray Bottles. From cosmetic spray bottles to medicinal spray bottles to chemical detergent spray bottles, spray bottle packaging is gaining popularity in various fields and markets. The more manufacturers began to produce and sell spray bottles,Plastic Spray Mist Bottles.In fact, the quality and advantages of a spray bottle lie in the nozzle. The performance and quality of the spray head determine the life and use experience of this spray bottle. However, the production of nozzles requires manufacturers and professional technology. At present, the nozzles on the market are generally produced by professional manufacturers, these manufacturers are mainly concentrated in Ningbo Yuyao area. Obviously, if plastic bottle manufacturers just started to produce spray bottles, they are not suitable for producing nozzles. However, specializing in the production of spray bottles, it is necessary to grasp and establish the production of nozzles as soon as possible because the nozzles account for most of the costs and profits of spray bottles.Therefore, for companies engaged in spray bottle production, although the market is expanding, it is important to understand the importance of the spray head. It can be said that spray bottle production has a certain technical threshold.Plastic Spray Mist Bottles

• Some details of the face cream bottle packaging 2023-03-01

  For facial milk bottle packaging, it is different from other packaging, and hoses have been used as packaging. Hose packaging is easy to squeeze, this is the best feeling that the face cream bottle brings to us.However, with the development of the market, more and more products have begun to pursue differentiation. We have found that in recent years, facial cleanser bottles have begun to appear in various forms. Including plastic bottles, glass bottles and so on. These packages are more exquisite and the traditional hose type face cream bottles are easy to squeeze out. However, in the course of use, facial cleansing milk tends to remain in the facial cleanser bottle, causing unnecessary waste.In this regard, hose face bottles should make some changes in the design details to improve the consumer experience.

• Plastic storage box, what kind of material is good, plastic storage box type 2023-03-01

  What is the material of the plastic storage box? The type of plastic storage box, plastic storage box is usually manufactured in three materials, PP, PP, and PP.The box material produced by the PP material is translucent. The PP high permeability material is made of a box that is highly transparent and more transparent than pp material.PP is a kind of practical one. Plastic Storage Bins.It has good toughness, resistance to falling and pressure,Storage Boxes, and is rich in color. It has white, beige, green, blue, etc. It can produce different colors according to different needs of customers.Whether it is a plastic storage box made of that material, it is an indispensable part of life, and it is very practical. The translucent plastic storage box of pp material, or the high transparent plastic storage box of pp high permeability material, is easy to break in daily use, but overall, it is more than enough for daily use.In addition, the car tool storage box is actually a product of PP co-propylene material, the actual use is firm and strong, not afraid of falling.Type of plastic storage box,Storage Bins 1. Dirty clothes storage box. More suitable for office workers, wait until the rest of the time, clean together. It is not afraid of the smell of clothes in the storage box, making the indoor air unpleasant. 2, socks storage box. This type is usually a nine-square shape. Each pair of socks can be placed in a small grid, stacked in different repeats, and it is convenient to take. 3, large clothes storage box. This plastic storage box is available in a single form or in combination. According to the type of clothes, the single form is sorted and placed quickly and easily, but the capacity is small and there are not many things to install. In the combined form, a plurality of boxes are combined to put clothes of different seasons together, but the floor space is large. 4, underwear stora